You will have to call one of the access numbers.
Meeting ID is 210400305


Minutes, IBIS Quality Committee

22 Jan 2008

11-12 AM EST (8-9 AM PST)

ROLL CALL
  Adam Tambone
  Barry Katz, SiSoft
  Benny Lazer
  Benjamin P Silva
  Bob Cox, Micron
  Bob Ross, Teraspeed Consulting Group
  Brian Arsenault
* David Banas, Xilinx
* Eckhard Lenski, Nokia Siemens Networks
  Eric Brock
  Guan Tao, Huawei Technologies
  Gregory R Edlund
  Hazem Hegazy
  John Figueroa
  John Angulo, Mentor Graphics
  Katja Koller, Nokia Siemens Networks
  Kevin Fisher
* Kim Helliwell, LSI Logic
  Lance Wang, IOMethodology
  Lynne Green
* Mike LaBonte, Cisco Systems
  Mike Mayer, SiSoft
  Moshiul Haque, Micron Technology
  Peter LaFlamme
  Randy Wolff, Micron Technology
  Radovan Vuletic, Qimonda
  Robert Haller, Enterasys
  Roy Leventhal, Leventhal Design & Communications
  Sherif Hammad, Mentor Graphics
  Todd Westerhoff, SiSoft
  Tom Dagostino, Teraspeed Consulting Group
  Kazuyoshi Shoji, Hitachi
  Sadahiro Nonoyama

Everyone in attendance marked by *

NOTE: "AR" = Action Required.

-----------------------MINUTES ---------------------------
Mike LaBonte conducted the meeting.

Call for patent disclosure:

- No one declared a patent.

AR Review:

AR: Mike update titles in IQ specification
- Done

AR: Mike update "datasheet" to "data sheet" in IQ specification
- Done

New items:

Web sharing:
- We used MeetingPlace web sharing for this meeting

DesignCon IBIS summit:
- Mike will not be there.
- Will there be an IQ presentation?
  - David, Bob, and Kim discusssed
  - It could be  a 5 minute presentation:
    - Where we are
    - Welcome Guan Tao
    - Roy had filled in section 7?
      - Not sure how long ago
      - We will not discuss this
  - David will do a short presentation

Question from Michael Mirmak: Will the Quality group have feedback for the
ATM team working on new measurements for IBIS?
- Mike will invite Walter to join us to describe the proposal

AR: Mike invite Walter Katz to talk about measurements BIRDs

Discussion of response to JEITA:
- David made a style change to his document.
- Mike showed the latest spreadsheet with response comments.
 - Items 11 to 20 have no response.
 - This was discussed at a meeting, and can be found in the minutes.
- Currently no one has extra time to work on this. No AR.

5.2.18.	{LEVEL 3} [Receiver Thresholds] Vth present and matches data sheet, if needed
- David: This is wrong:
  "Vth must match the output buffer timing measurement threshold in the data sheet."
  - We changed "output" to "input"
- Eckhard: We may be consfusing people with "Vth", when many industry
  documents refere to it as "Vref"
  - Mike: it may be that only documents for technologies like HSTL use Vref
    and Vth interchangably.
  - In HSTL Vref sets the threshold voltage using differential amplifiers.

Next meeting:

29 Jan 2008
11-12 AM EST (8-9 AM PST)

Meeting ended at 12:06 PM Eastern Time.